Adenia firingalavensis is a climbing, deciduous plant.
The main stem is around 2 meters high and 50 cm in diameter.
Other climbing stems grow from the main stem that can reach 15 meters in length.
It is a slow-growing plant but of a large size.
It is ideal to have it hanging in the garden.
The trunk has cone-shaped, wrinkled, and waxy.
The stem measures up to 2 m in height and 50 cm in diameter.
The leaves are short-lived, meaning they fall during a time of year.
Petioles (the stem of the branches) are between 2 to 10 cm (sometimes 12 cm).
The inflorescences are 4 to 10 cm long. They have 1 to 5 male flowers or 1 to 2 female flowers.
The male flowers have funnel-shaped and are about 3 cm long.
They have between 5 sepals, 9 to 30 mm long and 1 to 2 mm wide.
While female flowers are slightly more pronounced funnel-shaped, they are up to about 40mm long and 5mm in diameter.
Sepals narrowly lanceolate to linear, and up to 30 mm long.
The fruits are egg-shaped and solitary.
They are about 6 to 7 cm long and about 3 to 4 cm in diameter.
The skin is leathery, and they give between 30 to 60 seeds, which measure between 6 to 8 by 5 to 7 mm.
You may like: Adenia fruticosa
Adenia firingalavensis Care
Follow these steps, and you won’t have any issue with the
Care of your succulent plant.
Adenia firingalavensis can grow quite well in full sun or partial shade.
Something curious about this plant is that the Adenia firingalavensisi likes to be in the shade, while the leaves like to be in the sun.
One recommendation is to protect your plant during the sunniest summer hours to prevent the leaves from burning.
A very porous substrate is needed; you can add a universal substrate: pumice, vulcanite, and perlite to improve drainage.
If you don’t want to get too complicated with the substrate, you can buy a substrate for cacti and succulents, as they do very well.
The best way to propagate your Adenia firingalavensis is through seeds, since propagation by cuttings is possible, but usually, the plant does not produce a caudex.
If you want the plant to produce seeds, the best way to propagate them is from cuttings since they bloom more freely.
But if you want the plant as decoration, it is best to grow them from seeds, since they develop a caudex.
This plant should be watered with some regularity in summer, while in winter, it is best to keep the soil dry as much as possible to prevent the plant from rotting easily.
Also, this beautiful plant does not like to be watered a lot when it has no leaves.
Pests or diseases
The main problem with adenia is root rot when overwatered.
During spring and summer, keep taking care of your plant to prevent it from getting sick from some very common pests at this time of year.
You can fertilize your plant during the active growing season, that is, during spring and summer.
You only have to apply a specific fertilizer for cacti and succulents once every 2 to 3 weeks.
During the fall and winter, suspend fertilization; at this time, the plant does not need to be fertilized.
What you can do is add some fungicide during the winter (it can even be homemade) to prevent the appearance of fungi.
These plants appreciate warm, sunny climates.
They tolerate high temperatures quite well.
The ideal temperature for this plant is approximately 70ºF (21ºC).
If you have your plant in a pot, it is best that you keep your Adenia firingalavensis inside your home during the autumn and winter months, all with the purpose of protecting it from extreme cold.
If the temperature where you live is not lower than 60ºF (15ºC), you can have it outside, while if the temperature is below 44ºF (6ºC), it is best to have it inside.
If you have your plant in a pot, it is best to transplant it every two or three years.
If you notice that the roots are coming out of the drainage hole, it is time to transplant.
Make sure that the new pot has a drainage hole; you can also take the opportunity to add some slow-release fertilizer to strengthen your plant.
You don’t have to prune Adenia firingalavensis as regularly.
You just have to remove those leaves that are already wilted, to give the plant a more beautiful appearance and maintain its health.
This plant’s sap is poisonous, so you should handle the plant with caution, especially when pruning or transplanting your Adenia firingalavensis.
You should also be careful with thorns, as they can be dangerous.